Home / Products / Low Offset Mechanism
Low Offset Mechanism — 16-Inch Offset for Pools Up to 20x50
When deck space is limited, the Low Offset system delivers the same stainless steel engineering in a compact 16-inch footprint.
Avada Builder Instructions — Section 1: Hero
Container: 100% width, BG #003366, Padding 70px top / 40px bottom
Column: Single column, 8/12 width, centered
Elements: Breadcrumbs (Open Sans 13px #AACCEE), H1 (Montserrat 38px 700 #FFF center), subheadline (Open Sans 18px)
Avada Builder Instructions — Section 2: Hero Image
Container: White BG, 0 padding, inner max-width 1200px centered
Image: lo-hero.webp, width 100%, no border-radius, fade-in animation 0.6s
Designed for Pools Where Space Is the Constraint
Not every pool has the deck space for a standard mechanism housing. Retaining walls, property lines, raised bond beams, waterfalls, and tight backyards all create situations where a full-size mechanism simply won't fit. The Low Offset Mechanism was engineered specifically for these pools — requiring only 16 inches of offset from the pool edge to the back of the housing. It handles pools up to 20 feet wide and 50 feet long with the same all-stainless steel construction, the same ASTM F1346 certification, and the same 20-year mechanism warranty as the Standard system.
Avada Builder Instructions — Section 3: Intro Copy
Container: White BG, padding 50px top / 40px bottom, inner max-width 800px centered
Elements: H2 (Montserrat 30px 700 #003366), body text (Open Sans 16px #333 line-height 1.7)
Low Offset Mechanism Specifications
| Specification | Detail |
|---|---|
| Model | Low Offset (LO) |
| Construction | 100% stainless steel |
| Maximum Pool Size | 20 ft x 50 ft |
| Offset Required | 16 inches |
| Motor | Compact hollow-shaft BISON motor |
| Torque Limiter | Adjustable — protects motor and fabric |
| Safety Certification | ASTM F1346 |
| Control Options | Keypad (PIN-secured) or Rocker Switch |
| Mechanism Warranty | 20 years |
Avada Builder Instructions — Section 4: Specs Table
Container: BG #F5F5F5, padding 50px, inner max-width 900px centered
Elements: H2 (Montserrat 30px 700 #003366), raw HTML table in Text Block
Table header: BG #003366, white text. Alternating row colors #F9F9F9 / #FFF
When to Specify Low Offset
The Low Offset Mechanism is the right choice when any of these conditions apply:
- Limited deck space — Less than 24 inches of available space behind the pool edge at the mechanism end
- Retaining walls or property lines — Structural or legal boundaries that prevent a full-size housing installation
- Raised bond beams or waterfalls — Elevated features at the mechanism end that restrict housing height and depth
- Retrofit installations — Existing pools where the original construction didn't account for a cover mechanism
- Pool width 20 feet or less — The Low Offset system handles widths up to 20 feet; if the pool is wider, specify the Standard Mechanism
- Pool length 50 feet or less — Same constraint; pools longer than 50 feet require the Standard system
Avada Builder Instructions — Section 5: When to Specify
Container: White BG, padding 50px, inner max-width 800px centered
Elements: H2 (Montserrat 28px 700 #003366), intro paragraph, bulleted list with bold labels + em-dash descriptions (Open Sans 15px #333 line-height 1.8, disc style)
Same Engineering, Smaller Footprint
The Low Offset isn't a "budget" version of the Standard Mechanism. It uses the same stainless steel components, the same rope reel design, the same adjustable torque limiter, and the same aluminum track system. The difference is the motor — a compact hollow-shaft BISON motor designed specifically for the reduced offset housing — and the maximum pool size it can handle. If your pool fits within the 20 x 50 foot limit, the Low Offset delivers identical performance and the same 20-year warranty. The choice between Standard and Low Offset is purely a matter of available space and pool dimensions.
Avada Builder Instructions — Section 6: Same Engineering
Container: BG #F5F5F5, padding 50px, inner max-width 1100px centered
Layout: 2 columns (6/12 text, 6/12 image), 30px gap
Image: lo-installed-cover.webp, border-radius 6px, fade-in-right 0.5s
Low Offset Motor
The Low Offset motor is a compact hollow-shaft BISON unit engineered to fit within the 16-inch housing envelope. It delivers the same torque and reliability as the Standard system's E2000 motor, scaled for pools up to 20 x 50 feet.
Low Offset Motor — compact hollow-shaft design
Motor Detail — stainless steel housing
Avada Builder Instructions — Section 7: Motor Detail
Container: White BG, padding 50px, inner max-width 1000px centered
Elements: H2 + body text, then 2 equal columns, 25px gap
Images: lo-motor.webp (left, fade-in-left 0.5s), lo-motor-comparison.webp (right, fade-in-right 0.5s), each with centered caption below
Standard vs. Low Offset — Quick Comparison
| Feature | Standard (P2) | Low Offset |
|---|---|---|
| Max Pool Width | 24 ft | 20 ft |
| Max Pool Length | 60 ft | 50 ft |
| Offset Required | Standard housing | 16 inches |
| Motor | BISON E2000 | Compact hollow-shaft BISON |
| Construction | 100% stainless steel | 100% stainless steel |
| Torque Limiter | Adjustable | Adjustable |
| ASTM F1346 | ✓ | ✓ |
| Mechanism Warranty | 20 years | 20 years |
| Best For | Large pools, ample deck space | Limited space, retrofits, tight lots |
Standard P2 Mechanism shown for reference
Avada Builder Instructions — Section 8: Comparison Table
Container: BG #F5F5F5, padding 60px, inner max-width 1000px centered
Elements: H2 centered, raw HTML comparison table (3 columns: Feature, Standard P2, Low Offset)
Image below table: product-standard-comparison.webp, centered, max-width 400px, margin 30px auto 0, border-radius 6px, with caption
Compatibility
Pool shapes: Rectangular pools. Custom shapes may be accommodated — contact us for consultation.
Pool sizes: Up to 20 feet wide by 50 feet long.
Fabric: Compatible with all Aegis fabric colors and weights.
New construction and retrofits: Particularly well-suited for retrofit installations where deck space was not originally planned for a cover mechanism.
Electrical: Requires dedicated 110V or 220V circuit (consult installation guide for specific requirements).
Avada Builder Instructions — Section 9: Compatibility
Container: White BG, padding 50px, inner max-width 800px centered
Elements: H2 (Montserrat 28px 700 #003366), body text with bold labels (Open Sans 15px #333 line-height 1.8)
Related Products
Standard Mechanism
For pools up to 24 x 60 feet with standard deck space. The P2 full-system mechanism with BISON E2000 motor.
Learn More →Aegis Fabric System
Heat-sealed premium fabric with 7 color options. Designed specifically for Integra mechanisms.
Learn More →Avada Builder Instructions — Section 10: Related Products
Container: BG #F5F5F5, padding 60px, inner max-width 900px centered
Layout: H2 centered, then 2 equal columns, 25px gap
Cards: BG #FFF, border-radius 8px, padding 25px, box-shadow 0 2px 8px rgba(0,0,0,0.06)
Need the Low Offset for Your Project?
Contact us for specifications, site evaluation guidance, or to connect with an authorized installer who specializes in low-offset installations.
Contact UsAvada Builder Instructions — Section 11: CTA
Container: BG #003366, padding 60px, inner max-width 700px centered, text-align center
Button: BG #FFFFFF, color #003366, Montserrat 15px 600, padding 14px 40px, border-radius 4px, hover BG #E6EEF5
Link: /contact/